Borresen X3

Borresen X6

Bränd:
Borresen
Tüüp:
X-seeria põranda kõlar
Võimendus:
soovitavalt alates 50W
Tundlikkus:
88 dB /1W
Sagedusriba:
30Hz – 50KHz
Takistus:
6 Ohm
Elemendid:
x Tweeter Børresen planar ribbon tweeter 2 x Driver Børresen bass/midrange driver: 4.5 inches 4 x Driver Børresen bass driver: 4,5 inches
Mõõdud:
164,1 x 37,8 x 56 cm
Kaal:
79kg

20 350,00€

Toote info

Børresen has developed a new intro-level speaker series at an affordable price, making the Børresen speaker universe accessible to even more people. The Børresen X6 loudspeaker has been designed on the solid foundation of Børresen Acoustics’ development traditions, design philosophy and technological know-how.


Technologies and Components

The Børresen X series loudspeakers are not only a new intro-level into the Børresen universe, but also represents a real revolution in quality and performance in its price range. These speakers are created based on all the knowledge collected in the process of the creation of the M, 0 and Z-series. You´ll find components from these exclusive series in this Børresen X series loudspeakers – for instance the brand new Spread-tow carbon membrane, the highly praised Børresen ribbon tweeter and the use of copper caps in the magnetic motor system.X series membrane – Bass/midrange

X series membrane – Bass/midrange

This membrane is designed to achieve maximum stiffness with minimum noise. The technological requirements for this unrivaled high-end membrane performance made it necessary to design, develop and assemble all components in-house. 

The X-series membrane that consists of three skins laminated into a single unit: two layers of spread carbon fiber, with a layer of aramid honeycomb spacers in between.

The combination of these materials gives this membrane its unique properties. The spread-tow carbon fiber was designed to provide a skin with optimal stiffness. This unique feature of the membrane reduces sound-disturbing vibrations and resonances to unprecedented levels. The aramid honeycomb also has the best stiffness-to-weight ratio in the vertical direction. A flat response membrane in terms of resonances paved the way to build a very transparent loudspeaker with a reduced size of the magnetic motor system to optimize costs.

X series magnet system – Bass/midrange

In the X3 magnet motor system, we use double copper caps on the pole rings to achieve high flux and low inductance. The use of copper caps has been adopted from the Børresen Z-series. Copper produces a response to flux changes – the better the counter-effect of these copper rings, the flatter the inductance curve, and the lower the electro-magnetic resonance. In addition, lower inductance also means fewer spikes in the impedance curve. Both result in a lower load on the amplifier. To ensure high efficiency, the X3 has two pole rings. This causes the loss of some flux, which reduces efficiency, but this is compensated for by a larger magnet.

X series Børresen tweeter

The tweeter chosen for the Børresen X3 has the same design used in all other Børresen loudspeaker series. However, there is a reduction in magnet and iron mass. This is possible due to the extremely high efficiency of the original tweeter design. As a result, the efficiency has dropped only slightly from the exceptional 94 dB to 88 dB, but this is still an amazing efficiency for a tweeter.

The tweeter operates from about 2.5 kHz upwards. The moving mass is extremely low at 0.01 grams. The fully concealed tweeter can operate at an impressive speed. The high robustness of this tweeter allows it to handle very high transients without causing any deafening dips.

X series cross over

The Børresen X3 is equipped with a parallel crossover built with the same high-quality components from the Z Series. This makes for a very mechanically stable crossover that minimizes its self-resonance.

Brändist

Borresen

Børresen Acoustics 

All Børresen loudspeakers in both series share the same audio characteristics: An unprecedented musical authenticity, absolutely balanced and very natural in sound. The higher series offer even greater midrange clarity, a deeper bass response and an amazingly holistic, authentic soundstage.

What is Børresen?

Børresen Acoustics offers two different speaker series: the 0-Series and the Z-Series. 

When we embarked on the endeavor to create the ultimate loudspeaker, we set ourselves some overriding goals: Reengineering the driver technology, optimizing the crossover, bringing inductance down to the absolute minimum, and providing the loudspeakers with the best mechanical grounding and resonance control. 

From the impressive compact speakers to the top-of-the-line floor-standing models, all Børresen speakers are unique, in that they represent a quantum leap in speaker technology and incorporate fundamentally new and patented technologies. 

The distinctive shape of the speakers combines acoustic intent with a distinctive Scandinavian design that blends beautifully with the décor of any home.

Samas kategoorias on veel 3 toodet :