NEW! Scansonic HD M20

Manufacturer:
Scansonic HD
Type:
2,5-way floorstanding
Power:
100-300w
Amplification:
High quality amp recommended
Sensitivity:
88dB
Frequency Response:
45 Hz – 40 kHz
Impedance:
6 ohm
Crossover:
300 Hz 1order; 4 KHz 2 Order
Drivers:
1 sealed ribbon tweeter with kapton/aluminum sandwich membrane. 2 Mid/woofer 4”, Phaseplug + Honeycomb enforced glass fiber cone. 4 Woofers 4”, Honeycomb enforced glass fiber cone.
Enclosure:
Heavily braced, rear firing ports.
Size:
220 x 1085 x 295 mm
Weight:
18 kg
Color:
SIlk-black; Silk white

1 999,00€

About product

The M40 is a powerfull and elegant 2.5-way, floor-standing speaker. The speaker features a high-resolution ribbon tweeter, normally only seen in much higher priced products. In the M40, the tweeter blends seamlessly with two 4” honeycomb enforced glass-fiber midrange/ woofer drivers, arranged in a MTM configuration. The two midrange/woofer drivers are supported in the lower frequency regions by an array of 2 dedicated bass drivers. Don’t let the slim and elegant looks fool you - the M40 can really rock the house, when it’s four 4” woofers are put to work.

About brand

Scansonic HD

From the start, we were very focused on building on all the experiences and strengths obtained from designing the Raidho speakers. At the same time, we also had to be aware of the long heritage and the Nordic design tradition of the Scansonic brand. This time, the task also came with a budget and a desire to create the very best possible within financial limits.

It was clear to us from the very beginning, that some core techniques from the Raidho speakers would be of importance: The speakers had to be designed around a ribbon tweeter that works with at super lightweight diaphragm that is sealed around the edges to allow for a seamless transition to the midrange region.

Furthermore, they needed to be designed and developed with a speaker driver with a ridged, pistonic-type membrane.

philosophy-10.png

WEIGHT LOSS FOR RESOLUTION TRANSIENTS AND SUPERB LEADING EDGES
The MB ribbon tweeter has a membrane with an extremely low mass.
It is formed by a Kapton-aluminum sandwich that is only 20 um thick, and the resulting mass is app. 0.03 g., which is approximately 50 times less than any conventional textile, ceramic, beryllium or diamond dome. The lower mass translates directly into higher resolution and less material coloration.

WEAVED CARBON CONES FOR STIFFNESS AND LOW COMPRESSION
For the MB-series, we have developed a ridged, dustcap free, carbon membrane. By carefully optimizing the shape and stiffness, we have succeeded in making a very quiet woofer that blends beautifully with the ribbon tweeter. The woofer has an overhung magnet system, with long linear stroke and excellent bass performance.

Download

5 other products in the same category: